Dual Tv Driver Download For Windows

MonoPrice.com) specializes in the wholesale distribution of world class cable assemblies for home theater, PC, and high technology industries. MonoPrice.com offers a wide range of products from standard PC products, network cables, and HDMI cables to custom cable assemblies and wiring harnesses. Two dual tuner modes: picture-in-picture or two independent TV windows; Plugs into the USB port on your laptop or desktop PC. Also for the NVidia Shield with Plex; Status indicator LEDs showing that the tuner is loaded into Windows plus TVsignal strength; WinTV-dualHD has an improved TV receiver with superior over-the-air TV reception. Download TV Tuner / Capture Card drivers for Windows, firmware, bios, tools, utilities. Driver Booster is the top one driver updater, which will find, download, and install all the drivers at one stop. Here if you feel like installing LG monitor drivers on Windows 10, you can try to use Driver Booster to scan for LG monitor condition and then update the LG drivers for LG onscreen control or LG split screen software.

None at this time.

What Operating Systems are supported by the WinTV-dualHD?

• Microsoft® Windows® 10.
• Windows 7 and 8 (all versions), 32-bit and 64-bit
• Windows Vista (all versions), 32-bit and 64-bit with latest Service Pack, 1 GB RAM
• Windows Media Center in Windows 7 or Windows 8

System Requirements

• Processor Requirements (minimum):
• Core2Duo 2.93Ghz or faster

Note: If your PC is not fast enough, you might see jerky live TV video, but your TV recordings will be fine.

• Microsoft® Windows 10, 8,8.x, 7® or Windows Vista with latest Service Pack, 1 GB RAM
  
• Windows Media Center in Windows 7 or Windows 8
• USB 2.0 (Hi-Speed) or higher
• Sound and graphics with support for DirectX® 9 or higher
• Internet connection for software installation and activations

Can I use the WinTV-dualHD with Media Center?

Yes, the WinTV-dualHD can be used with Windows Media Center. Simply download and install the latest drivers from the Hauppauge website.

The WinTV-dualHD is seen as 2 tuners so you can watch one TV program or record up to 2 TV programs at the same time.

NOTE: DVB-C (Digital Cable TV Programs) tuners are not supported in Windows Media Center Application. Alternatively you can use the bundled Hauppauge WinTV v8 application to setup your freeview DVB-C channels.

What type of channels will I receive with the WinTV-dualHD?

DVB-T/T2 over-the-air digital TV: Supports all DVB-T/T2 formats, up to the high definition 1080p/30 format!
Note: For DVB-T/T2 digital TV, a rooftop/out door antenna is recommended for optimal results/signal strength.

DVB-C cable TV Channels: some of the DVB-C digital cable TV channels are encrypted in some countries like Singapore where you can still receive the DVB-C cable TV freeview digital TV channels using the dualHD.

WinTV-dualHD's DVB-C tuner allows users to watch unencrypted (free to watch) digital TV channels from their cable TV provider without a set-top box.

Note:For Singapore residents, you can receive the Mediacorp's free-to-air digital TV programs from your SCV's wall socket cable TV input point.
Select the option as DVB-C and do a complete scan to lock all the available free-to-air Digital TV programs via your Starhub cabel TV point without using the set-top box.

Can I get HDTV with the WinTV-dualHD through my Cable or Satellite box?

No. The WinTV-dualHD has a DVB-T/T2 over-the-air digital TV tuner built-in and supports all DVB-T/T2 formats, up to the high definition 1080p/30 format. The WinTV-dualHD will support DVB-T/T2 broadcasts that are currently being transmitted over-the-air. It will not be able to decode HD broadcasts that come through your cable or satellite set-top boxes.

If you have an HD cable TV or satellite box and want to record HD TV, you can use Hauppauge's HD PVR.

The WinTV-dualHD also will support freeview DVB-C cable TV channels through your direct cable TV line without connecting through the Cable TV set-top box, if freeview DVB-C channels are available from your cable TV provider.

Note: not all cable operators broadcast DVB-C digital TV. Contact your local cable operator to check if they provide DVB-C freeview digital channels.

What type of recordings can I make with the WinTV-dualHD?

Using the WinTV v8 application the WinTV-dualHD, will record in a transport stream (TS)
For DVB-T/T2 and DVB-C digital TV recordings, the recording format and bit rate is exactly the same as the broadcast format (i.e. DVB-T 1080p is recorded at 1080p).

Note: TS files can be converted to MPEG files using options in the WinTV v8 configuration menu.

Note: Not all recordings made with DVB-T/T2/C signals are DVD compliant.

Does this device support in Australia and can I receive DVB-T digital HDTV in AU with the WinTV-dualHD?

Yes, it does fully support in Austarlia's DVB-T free-to-air digital TV broadcating. You can record or wacth two different digital HDTV programmes at the same time with the WinTV-dualHD.

Can I use the WinTV-dualHD in New Zealand and what type of TV programmes can I get in NZ?

What are the TV programmes can I receive in Singapore with the WinTV-dualHD and how do I connect the TV input?

In Singapore you can receive MediaCorp's DVB-T2 free-to-air digital HDTV channels like Ch 5, Ch 8, CNA, okto, Ch U, Suria and Vasantham, programmes.

You can connect the TV input to the WinTV-dualHD from the starthub's (SCV) cable TV input point using a co-axial cable. And scan the channels using the DVB-C option when you do the initial set-up on the WinTV v8 application.

If you are living in a landed property or industrial building where there is no cable TV input points then you can connect the TV input from a roof-top anntena and scan your channels using DVB-T option on WinTV v8 application.

WinTV-dualHD gives you upto 2 Live TV programmes.

Can I watch and record 'two shows at the same time with the WinTV-dualHD?

Yes. The WinTV-dualHD has two DVB-T/T2/DVB-C tuners you may record two shows simultaneously while viewing with WinTV v8 application.

Gunze mice & touchpads driver. A computer mouse is a pointing device (hand control) that detects two-dimensional motion relative to a surface. This motion is typically translated into the motion of a pointer on a display, which allows a smooth control of the graphical user interface. Physically, a mouse consists of an object held in one's hand, with one or more buttons. Get manuals, troubleshooting tips, firmware updates and more. Or submit a trouble ticket for personalized assistance from one our our trained agents.

You can also use Windows Media Center to record two program at the same time.

Can I watch and record 'four shows at the same time if I install two of the WinTV-dualHD?

Yes. If you install two of the WinTV-dualHD in the same PC or Note Book then you can rcord or watch four programs simultaneously while viewing with WinTV v8 application.

A high speed CPU like quadcore or i5/i7 or equivalant and a good graphics card with at least 1GB video RAM is required to record or wacth 4 programs or more simultaneously.

Black video window or choppy video when watching a digital TV channel

If you are watching a digital TV channel and you see choppy video, no audio or a black screen, then it is possible your PC is not fast enough to decode and play the digital TV channel you are watching. Please verify that your system meets the minimum requirements for using the WinTV-dualHD

Digital TV, especially DVB-T/T2 high definition digital TV, is very CPU intensive. Many graphics cards have special built-in hardware to speed up decoding of high definition TV channels.

On graphics cards without special video decoding features, you can often improve the playback performance by using the Video Renderer settings located in the settings menu of WinTV v8. To open the setting menu click on the “gear” button located in the lower left of the WinTV v8 screen.

The default mode is EVR. The other modes are VMR9, VMR7 and Overlay. Each mode uses a different process to render video. Try each mode and use the one which gives you the best results. To use hardware acceleration put a check in the box “use hardware acceleration when possible. This will allow your graphics system to use hardware acceleration for video decode. Note: graphics hardware acceleration does not work on all systems. After making a change in video rendering settings Wintv must be restarted to take effect.

Windows cannot verify the digital signature for the drivers required for this device error code 52?

This appears to be a bug in windows 64 bit OS. Our drivers are signed.

'Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)'

The following is probably the easiest fix to Error Code 52 on Windows 7 or Windows 8 64bit.

In device manager right click the Hauppauge product under Sound Video and Game Controllers with the exclamation mark and select Uninstall.

On the Confirm window please check the box for 'Delete the driver software for this device' and click OK.

Once the drivers are gone on the top of Device Manager click on 'Scan for Hardware Changes'.

Windows should now look online automatically for drivers.

Take a look after a few minutes if the drivers are installed automatically properly under Sound Video and Game Controllers.

If they still come back as 'unsigned' try the procedure again.

Prodinfo.exe is a program you can run which will extract information about the WinTV product you have installed such as model and serial number, MAC address, revision, and features which can be used to identify the exact model of your product. The driver for the device must be installed in order to run Prodinfo.exe

HCWCLEAR.exe is a program you run to remove all driver and files that were installed with the installation of the Wintv program.

Note on new product installs:

If you have recently purchased a new WinTV product and it came with a WinTV v8.5 Activation code, you can install WinTV v10 with this code. This only applies to unused WinTV v8.5 Activation Codes.

Installation notes for WinTV v10:

If you do not have a WinTV v10 Activation Code, you can purchase a new WinTV v10 Activation Code on the Hauppauge webstore.

If you have purchased an Activation Code for WinTV v10 with Extend from the Hauppauge Webstore, the latest version of WinTV v10 with Extend will be installed.

Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. We link the serial number of your TV tuner (sometimes it's the MAC address) with the Activation code. So as long as you use the same Hauppauge device, you can install on more than one computer.

WinTV v10

This download is a complete WinTV v10 application, including Windows drivers for supported WinTV products plus utilities.

WinTV v10 installer version 39034 with updated HLS support for Extend
For Windows 10, 8, and 7
Version: 39034 | File size: 151 MB | Date: Feb 2, 2021
Release notes | Backup download site | Previous version 38066

WinTV v10 installation instructions

The WinTV v10 installer will install Windows drivers before installing the WinTV v10 application. It will also remove any pieces of a previous WinTV version before installing the new version.

• Step 1: Download the WinTV v10 installer by clicking the download button above. The WinTV v10 installer is normally saved in the Download folder on your PC
• Step 2: Run wintv10setup from the Download folder on your PC. If you see the message 'Windows Protected Your PC, Windows Smartscreen prevented an unrecognized app ..', click 'More info' and 'Run anyway'. Windows Smartscreen is a new 'feature' in Windows 10 to prevent new updates from being installed automatically.
• Step 3: Halfway through the installation, a message will pop up asking for you to enter the Activation Code.
• Step 4: At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you or is printed on the WinTV v10 activation card. You do not need to enter the dashes, and you can use upper or lower case characters.
• Step 5: When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon and the WinTV application will run. On the first run of WinTV, it will automatically go through the TV source selection and will scan for channels.

New product installs:

If you have recently purchased a new WinTV product and your WinTV v8.5 Activation Code has never been used, you can install WinTV v10 with this code. This only applies to unused WinTV v8.5 Activation Codes.

Installation notes for WinTV v8.5:

If you have one of the following products: a Hauppauge WinTV-HVR-850, WinTV-HVR-950, the original Colossus or HD PVR model 1212, you must use WinTV v8 or WinTV v10. WinTV v8.5 does not support these products.

A WinTV v8.5 Activation Code will be needed to install this WinTV v8.5 version. If you do not have an Activation Code, but you have a WinTV v7 CD, you can install the WinTV v8 application.

If you do not have an Activation Code: If you do not have a WinTV v8/8.5 Activation Code, you can purchase the new WinTV v10 Activation Code on the Hauppauge webstore for $12.95. This can be used with WinTV-HVR, WinTV-dual and WinTV-quad products, as well as the HD PVR series of HD recorders plus USB-Live2 and the ImpactVCBe.

Extend: If you have an Activation Code for WinTV v8 or v8.5 with Extend, the latest version of WinTV v8.5 with Extend will automatically be installed.

Installation on multiple computers: the WinTV application can be installed on as many PCs as needed as long as you use the same Hauppauge device. We link the serial number of your TV tuner (sometimes it's the MAC address) with the Activation code. So as long as you use the same Hauppauge device, you can install on more than one computer.

WinTV v8.5 application and Windows driver package

This download is a complete WinTV v8.5 application, including Windows drivers for supported WinTV products plus utilities.

WinTV v8.5 Installer
For Windows 10, 8, and 7

Version: 37352 | File size: 103 MB | Date: Dec. 25, 2019
Release notes | Backup download site | Previous version

To install the WinTV v8.5 application

• Step 1: Download the WinTV v8.5 installer by clicking the download button above. The WinTV v8.5 Installer is normally saved in the Download folder on your PC
• Step 2: Run wintv85setup from the Download folder on your PC. Halfway through the installation, a message will pop up asking for you to enter the Activation Code.
• Step 3: At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you, is printed on the WinTV v8 activation card or printed on your WinTV v8 CD. You do not need to enter the dashes, and you can use upper or lower case characters.
• Step 4: When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon and the WinTV application will run. On the first run of WinTV, it will automatically go through the TV source selection and will scan for channels.

WinTV-dualHD Windows driver

Windows driver for WinTV-soloHD, WinTV-dualHD, WinTV-quadHD USB, WinTV-NOVA-S2 and 461e driver, version 38125

You can use the Hauppauge WinTV-dualHD (North America, Europe, Australia and New Zealand) on the nVidia Shield for live TV in Plex. You will need the latest version of nVidia Shield firmware (5.2 or later).

Setting up Plex TV with a Hauppauge TV tuner on the NVidia Shield

Here are some ideas on cord cutting from the nVidia blog.

Where can I find the manual for WinTV?

In WinTV v8, right click your mouse in the live TV window, and go to Help. You will see our online manual.

You can also find the manual on our website in the Support -> WinTV v8 under the Manuals tab.

What do I need to upgrade the WinTV application from the Hauppauge website?

In order to upgrade to WinTV v8.5, you must have your WinTV v8 Activation Code. If you do not have an Activation Code , but you have a WinTV v7 CD, you can install the WinTV v8 application (look in the Support -> WinTV 8 Download tab).
If you do not have either a WinTV v8 Activation Code or your original WinTV v7 CD-ROM, you can purchase a new WinTV v8 Activation Code on the Hauppauge webstore for $9.95. The WinTV v8 Activation Code can then be used to activate WinTV v8.5

How do I rescan channels?

In WinTV v8, click on the setting button (Gear) in the lower left of the application. Then click on the Devices tab and highlight your WinTV device and click Tuner Setup (see the first picture below).

In the Device Setup Wizard, you will see a list of TV formats which your Hauppauge TV tuner can support. Depending upon which Hauppauge tuner you have, you will have a choice of analog, digital or external inputs (see the second picture below). You can also select all formats and let the WinTV application show you what it finds in each format (if anything).

Click Next and Next and let WinTV scan for channels. The results should look like picture 3 below.

Settings -> Devices

click to enlarge

Device Setup Wizard

click to enlarge

Scan Complete

Dual Tv Driver Download For Windows 10

click to enlarge

I selected a channel but I just see 'buffering' in WinTV. Also there is no TV, just a blank screen

Buffering and no TV video can be caused by a few things:

• If there is a problem with your TV signal. Check your antenna or coax cable going to the Hauppauge product.
• If your anti virus software is preventing the WinTV application from making a temporary video buffer. If this is the case, you'll need to either disable the anti-virus software or create an exception for the WinTV application in your anti-virus exception list.
• If you using a cable TV or satellite box, make sure the box is turned on.

I scanned for channels, and some were found, yet I do not see any channels listed in WinTV's channel list. What did I do wrong?

If you see channels during the scan, but no channels are listed in WinTV channel list (to see the channel list, right click your mouse on the live TV window, then select Find Channel), then something went wrong in the WinTV TV channel database.

Solution:

• Uninstall WinTV completely: go to start/control panel/ and look for Program and feature and uninstall Hauppauge WinTV.
• After that please restart the computer.
• When the system comes back up please browse to the following folders and if you see a WinTV folder, delete the folder.
  • C:UsersPublic
  • C:Program Files or Program Files (x86)
  • Also please go to this folder which is a hidden folder and delete the Hauppauge folder: C:ProgramData
    Information on how to show hidden folders in Windows: Show Hidden Files and Folders in Windows 7, 8.x, 10, or Vista http://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/
• Once you do this you can reinstall Hauppauge WinTV with latest version from website.
• Now if you scan for channels, you should see them in the WinTV application.

Our local TV channel switched frequencies today. I've been unable to get the rescan to work. I can find all the channels on the rescan but can't seem to save them in the database.

We recommend that you delete the WinTV channel database before you re-scan for channels, especially if you think that your channel line up has changed. To do this, close the WinTV v8/v8.5 application and then run this program:
c:Program Files (x86)WinTVWinTV8WinTV8.exe -emptydb

I'm trying to schedule a recording with TitanTV, but the scheduled recording does not show up in the WinTV Scheduler

The channel list in TitanTV must match the channel list in WinTV. If, for example, you scanned WinTV with an over-the-air antenna but selected a cable TV line up in TitanTV, your channel line will be different and scheduled recordings will fail.

To understand why this happens, lets look at how the process of clicking the record button in TitanTV and how this turns into a WinTV Scheduled recording. When you click the red 'record' button in TitanTV, Titan delivers a .tvpi file to your PC which contains the details of the recording (channel number, channel name, time, date, etc.). But if the channel number doesn't match a channel which WinTV can tune to, WinTV ignores this attempt to schedule the recording and you will not see this scheduled item in the WinTV Scheduler.

There is a log file saved at c:userspublichauppauge wintvlogswintvtvpi.txt which shows the details of an attempt to schedule a TitanTV recording. Click here to see a sample of this information.

Can I record while my PC is sleeping?

Yes.
Make sure your PC is in Sleep and not Hybernate. In Windows 'sleep' mode, WinTV recordings will cause your PC to 'wake up', start the recording and when complete, go back to Sleep.

How can I save my WinTV Channels database?

To avoid having to rescan for TV channels, you can save the list of channels you are using. This is called Saving the WinTV Channels database.

To save your channel database go to:

C:UsersPublicWinTVChannel Database (Windows 7 and Vista)

C:Documents and SettingsAll UsersShared DocumentsWinTVChannel Database (Windows XP)

Copy the hcwChanDB_5 file to a place for safe keeping. To replace saved Channels just copy HcwChanDB_5 back to Channel Database Dir.

How can I reorder or change the channel numbers in WinTV?

Open the Settings menu in WinTV v8 by clicking on the “gear” button in the lower left hand corner of the WinTV application. Then click on the “All Channels' tab and right click on the channel you wish to edit. Click Details. Change the Preset number to the number you want. You can also change the channel Name.

Example:
You will need to follow this procedure if you are scheduling recordings with Titan TV online program guide. For example, if you scan for TV channels in WinTV v7 and find that channel 2704 is WNBC but in the TitanTV electronic program guide WNBC is on channel 702, then do the following:

• click your right mouse button on 2704 in the All Channel list
• change the Preset to 702
• change the Name of the the channel to WNBC

  Then, when you select WNBC (channel 702) in TitanTV, it will tune to channel 2704, which is WNBC.

How can I add a single channel in the WinTV application?

Yes.
To add a single channel, go to Settings -> Devices and choose your TV tuner. Then click Tuner setup and select the format of the channel you want to add (Digital ATSC, Digital QAM or Analog TV). For both the Starting and Ending channel use the channel number you want to add. Example, if you want to add Analog channel 3, then select 3 for both the Starting and Ending channel. Then click Scan. Since you are only scanning one channel, it should find this channel quickly and add it to the channel list.

Where can I find my recorded files?

The default directory for recorded files is:

C:UsersPublicVideos

You can change the default directory in WinTV v8 by clicking on the “gear” button, then the Capture tab. Here you will see the Recordings Directory.

In Windows XP, files are recorded to:

C:Documents and SettingsAll UsersShared DocumentsMy Videos

Can I record TV shows with subtitles or closed caption?

Can I view and record my game play from external game sources with WinTV?

WinTV v8 Installation Problems

Some virus software will prevent the WinTV application from completing the installation. If you find this, you will need to temporarily disable the virus sofware.

Dual Tv Driver Download For Windows 8.1

Here are a couple of virus applications and how to disable them:

• AVG: 1) Right-click the AVG icon in the system tray next to the clock. 2) Click Temporarily disable AVG protection. 3) Choose how long you want the protection to be disabled and whether to disable the Firewall as well 4) then click OK.

I am getting a black screen in WinTV, or I'm seeing choppy video images. What can cause this?

There are two main reasons why you might see a black window:

TV Signal strength:. If the TV signal strength is on the edge of being too low, you might see either a black screen where the live TV picture should be, or your live TV picture might be choppy. Also, be sure that the incoming signal from your video source is working properly.

Graphic display adapter related: The video graphics acceleration mode can cause choppy live video or possibly cause a black screen where the live TV picture should be. To optimize the video graphics mode, in the WinTV v7 application go to Settings and look under Video Renderer. EVR is the default setting. Try VMR 7, VMR 9, or overlay for better results. You may also try placing a check mark in “Use hardware acceleration when possible”.

If there is still no improvement, enabling extended logging in WinTV and emailing the log files to tech support will help in troubleshooting the problem. (To obtain extended logs, first go to Settings/Advanced options. Enable extended logging, exit WinTV and reopen it for the change to take effect).

What video format will WinTV record in?

There are two types of recordings WinTV v8 will make: recordings from digital TV and recordings from analog TV.

Emsense port devices driver. Recordings from digital TV (ATSC, DVB or QAM) stay in the original digital TV format and in the original video quality. WinTV will save the recordings in a transport stream format (.TS extension). These files may be converted to MPEG2 using options in the WinTV Configuration menu.

When recording from analog TV (NTSC or PAL), recordings are made using MPEG2. You can choose the quality of your analog recordings in the Settings menu under Capture and then Default Analog Recording Quality.

What software can I use to edit & burn the recorded files from WinTV?

When recording digital TV, all recordings are made in whatever format your digital TV is being transmitted in. For example, ATSC is transmitted as MPEG-2 and therefore WinTV recordings will be MPEG-2. The files will be .TS files.

When recording from analog video or analog TV, WinTV will record MPEG-2 video using a .TS format. To edit your videos, you can use any software editor that can work with .TS files or MPEG-2 files

What file size will the recorded videos be?

Digital Broadcasts (ATSC or QAM)

The file size of a digital signal capture depends on the bitrate of the digital signal. The bitrate is set by the broadcaster and cannot be user configured. Bitrates for digital signals can range anywhere from about 1.2 Mbits/sec up to 19.3 Mbits/sec. Most of the time these bitrates are variable and not constant. Capture sizes for ATSC & QAM recordings range from approximately 1.7 Gigabytes per hour up to 8.3 Gigabytes per hour.

Analog TV or analog video

The WinTV application converts analog signals to digital in order to record. There are four recording profiles. The following list shows recording file sizes for burning to 4.3Gb DVD:

Best - Approx 1 Hour+
Better - Approx 1 1/2 Hours
Good - Approx 2 Hours
Fair - Approx 3 Hours

How do I scan for FM radio channels? And once I have scanned for FM radio, how do I find these radio stations in WinTV?

On those WinTV products with FM radio, you can scan for FM radio channels:

• click the Setup button (gear button) on the lower left hand side of the WinTV app
• click the Device tab
• Choose your WinTV product, and then click Tuner setup
• you should see a list of video and audio sourcs available on your Hauppauge TV tuner. Click Analog FM Radio and then Next
• under Stations, select either Automatic Scan if you want the WinTV application to scan for FM radio stations, or Manual Entry if you want to enter your FM radio stations one at a time
• then click Next to start the FM radio scan
• the scan is complete when the message Scan complete is displayed
• click Next and Next and you will be back to the main WinTV application
• to select your FM radio channel, right click your mouse in the TV window and select Find Channel. You will see your FM radio channels at the end of your channel list.

Download Driver For Windows 10

How can I see the WinTV v8 channel list all the time?

You can display the TV and FM radio channel list all the time by Right Clicking on the live WinTV v8 window to bring up Find channel. You will see the Channel list (see picture below).

In the upper right hand corner of the Channel list is a small 'pin' icon. Click this icon to 'pin' your channel list to the WinTV v8 window.

Keyboard shortcuts

• Ctrl A Aspect ratio
  Ctrl D Display the video and audio format of the TV program
  Ctrl F Freeze the video
  Ctrl Z Open TV Scheduler
  Ctrl O View program details (digital TV program, where provided in the broadcast)
  Ctrl S Display subtitles
  Ctrl W Full screen toggle
  Alt F Open File menu for playback
  Alt M Open the Task Menu
  Alt P Previous channel
  Ctrl Q Pause
  Ctrl P Play
  Alt R Record
  Alt S Stop
  Alt T Start TV
  Ctrl C Catch up
  Ctrl > Skip ahead
  Ctrl < Skip back

Problems running the WinTV application on Windows Server

If you want to use WinTV on your Windows Server, you may encounter the problem that it won’t recognize any of your DVB devices. This is because there is no BDA support (Broadcast Driver Architecture) on Windows Server 2008 / 2012. So if you want to use BDA based hardware (i.e. DVB TV cards) it is neccessary to add BDA harware support manually.

To fix, see these instructions: https://marcowuen.wordpress.com/2012/08/13/howto-add-bda-hardware-support-to-windows-server-2008-r2/